Ibex 24

DISCONTINUED

Ibex is a bicycle for those looking for large wheels, 26 or 24 inches. The Ibex is a fast and comfortable recumbent, suitable for cycling but that performs very well off the asphalt.

It is similar to the Max (high-end), and can be configured as both an urban bike and a mountain bike, depending on the components you choose.

A larger front wheel improves control on difficult terrain to some extent and reduces bounce. However, the height of the Ibex determines the height of the cyclist, with around 175 cm being a recommended minimum to ride it comfortably.

DATA SHEET

  • Steering: lower, upper or superman type ('open cockpit')

  • Aluminum frame, with TIG type welds

  • Aluminum rear fork, with suspension

  • Rigid front fork, optionally with suspension

  • Fiberglass or carbon-kevlar seat, sizes M, L or XL

  • Foam type seat pad, 50 mm

  • Seat angle between 23 and 40º

  • Seat adjustment range: length 130 mm, height 60 mm, angle 17º (all with quick releases)

  • Frame adjustment range: 200mm length, adjusting the front arm

  • 26 or 24 inch wheels (both the same)

  • Wheelbase: 1040mm

  • Minimum total length of 170 cm

  • Minimum height (with seat) of 120 cm

  • Minimum seat base height of 62 cm (24 inches), 65 cm (26 inches)

  • Bottom bracket height: minimum 74 cm (24 inches), 77 cm (26 inches)

  • Handlebar width: 65cm (low handlebar), 45cm (high handlebar)

  • Approximate weight: 16 Kg, depending on components and accessories

  • Maximum load capacity: 125 Kg (cyclist + load)

STANDARD EQUIPMENT

  • Handlebar: above the seat (ASS)

  • Gear system: Shimano Alivio 24 speeds, 3 Shimano FCT-4010 chainrings (48/36/26), 8 Novatec sprockets (11-32), range 537%

  • Seat: fiberglass, sizes M (<175 cm), L (175/188 cm), XL (>188 cm)

  • Brakes: individual, Tektro V-brake (rim, mechanical)

  • Rear suspension: DNM DV-22 (steel/oil spring), with 80 mm travel

  • Tires: 26/26 or 26/24-inch Remerx Grand Hill

  • Tires: Schwalbe Marathon Racer

  • Pedals: standard MTB aluminum

  • Cranks: standard 170mm

  • Shift levers: : rotary grip controls

NOTA IMPORTANTE

Las fotografías son de carácter orientativo, para mostrar diferentes opciones de configuración y componentes, por lo que no tienen carácter contractual.

El precio indicado (si se indica) corresponde al modelo básico, sin extras ni accesorios, según la configuración mínima de serie (es decir, el más económico), y puede no corresponder con alguna o ninguna de las fotografías. Para un presupuesto personalizado, ponte en contacto con nosotros.

©Traducción o texto original de Jason Harris, con autorización del propietario de la marca.
  • desde 

    €2,190.00